£4.99
Compatible with Dolphin Flush Mounted Parking Sensor Audio kits.
Simply plug in your existing Flush Parking Sensor Audio Buzzer to extend a further 4 meters. Perfect for longer vehicles or if you have a greater distance to route the audio buzzer cable.
Compatible with Dolphin Flush Mounted Parking Sensor Audio kits.
Simply plug in your existing Flush Parking Sensor Audio Buzzer to extend a further 4 meters. Perfect for longer vehicles or if you have a greater distance to route the audio buzzer cable.
This buzzer is identical to the one included with our award-winning reverse parking sensor kits. You can hide it in the car’s interior or beneath the parcel shelf; it’s very loud, so you should be able to hear it from wherever is most convenient for you.
The buzzer can be mounted with an adhesive strip or two screws screwed into the car’s lining for a more permanent / secure solution.
Flush Mount Parking Sensors Spare Power Lead
Spare Flush Mount Parking Sensor, only compatible with Dolphin Flush Mounted Parking Sensor Kits. Available with a lead length of 2 or 6 meters.
This is the same display that comes with the most popular Dolphin kits, which have won numerous awards. The image as well as the sound produced are both clean and clear.
Instead of providing you a more general reading for the entire car, that would not be as accurate, the LED display will indicate you if you are closer to an obstruction on the right or left side of the car, by lighting up.
Audio Brainbox for 4 sensor kits (DPS400)
This brain box has the Dolphin logo printed on it. This box is where you hook in all of your sensors, the buzzer, and the power cable.
For Front Flush Mounted Parking Sensor Kits. Using the CAN Bus Interface, you will be able to power the front sensors based on the vehicle speed. This interface will trigger power to the front sensors when your vehicle speed drops below 6mph. The power will be cut when the vehicle speed exceeds 6mph.
The perfect way to automate your Front Flush Parking Sensor Kit. Fitting instructions are included, before you purchase please check vehicle compatibility.
Flush Mounted Parking Sensors Spare Hole Punch.
Use this Spare Hole Punch for drilling additional holes into the bumper, to house Spare Flush Mounted Parking Sensors.
Spare Flush Sensor Mounting Bracket.
For use with Dolphin Flush Mounted Parking Sensors, this backing plate adheres to the inside of the bumper.
Reviews
There are no reviews yet.